Soft Washing the Greenwood Wall Where the Generator Lives
How we soft wash a Greenwood wall around a standby generator, AC condenser, meter and electrical boxes, and why that shaded side streaks first.
How we soft wash a Greenwood wall around a standby generator, AC condenser, meter and electrical boxes, and why that shaded side streaks first.
How we wash a detached metal shop in Greenwood: painted panels, the roll-up door with its seals and tracks, and an apron full of oil, tire marks and red clay.
Why the concrete riser and low flagstones go green first on Greenwood steps, and how we wash stone set in mortar without opening up the joints.
The red clay band, white salt bloom and shaded green on Greenwood brick ranch homes: what each one is and what a careful wash can and cannot do.
Reading a Greenwood stucco or EIFS wall before washing: green streaks, old patches and peeling, why we keep pressure low, and what a wash will not fix.
A covered Blanchard porch never gets rinsed by rain, so dust, pollen and webbing just build until the ceiling, columns and whole slab are washed in that order.
Zebra striping is an overlap problem. How broom and trowel finishes clean differently, and why edges and the asphalt seam still need a wand.
Pine needles pack into a mat that holds water against Blanchard fascia and soffit. Why flushing the whole run beats scooping the visible ends.
Everything washed off a shaded Blanchard roof lands on the beds below. Pre-wetting, tarping, downspout handling and the rinse order that protects plants.
Algae, chalking, tannin bleed and oxidation all look alike on a Blanchard wall. How we tell them apart before mixing, and what a wash will not fix.