Skip to content

Red Clay Removal

Red Clay Removal Services

Rust-orange clay staining lifted from concrete, brick, and siding with iron-specific chemistry, done right the first time.


Red Clay Is a Rust Stain, Not Ordinary Dirt

Anyone who has lived around Marshall long enough knows what red clay does to a white slab. Rain splashes it up, tires track it in, and a gutter that dumps onto bare dirt paints a rust-orange fan across the driveway. The color is iron oxide, the same compound as rust, and it bonds to the minerals in concrete. Pressure alone will not touch it. It takes chemistry made for iron, applied at the right strength, and rinsed at the right time.

Our clay work starts with a test spot, because the fix depends on the surface. On concrete we use an iron-removal treatment that converts the stain so it rinses clear. On brick and painted siding we drop to gentler mixes and let dwell time do the work instead of pressure. We keep going, section by section, until the orange is gone or we have shown you exactly why a faint trace of it is going to stay.


The Orange Stain Problem Nobody Warns You About

Harrison County sits on some of the reddest dirt in Texas, and the parishes across the state line are no better. New builds have it worst, since fresh-graded lots have no grass to hold the clay down and the first year of rain streaks every slab and skirt board. We also see it along flower beds and fence lines, and anywhere a downspout discharges onto open soil and splashes back against the house.

The lasting fix is usually two parts. Remove the stain, then change what keeps causing it. While we work we will point out the splash zones, the short downspouts, and the bare patches sending clay onto your concrete, so the stain you paid to remove does not come back with the next storm. Homeowners, builders, and property managers all get the same straight answer and a written price before we start. Call (318) 401-2772.

Step 1

Test spot to confirm the treatment and set honest expectations

Step 2

Iron-specific chemistry applied and worked section by section

Step 3

Full rinse, then a walk of every treated surface with you


Why Choose Ark-La-Tex Pressure Pros

Southern Values

We grew up in the Ark-La-Tex region with values of faith, family, and integrity. Those values guide every job. Your property gets the same care we give our own homes.

Right Equipment

Commercial-grade pressure washing and softwashing equipment paired with proper technique means better results and zero damage to your property.

Honest Pricing

No hidden fees, no surprise charges. Detailed written quotes: the price we quote is the price you pay. Our reputation depends on treating people right.


Related Services

You may also need these services for a complete property cleaning.


Areas We Serve for Red Clay Removal

Based in Marshall, TX, serving a 60-mile radius across the Ark-La-Tex region.

See Our Work

Real results from real jobs across the Ark-La-Tex region.

Pressure washing results by Ark-La-Tex Pressure Pros Pressure washing results by Ark-La-Tex Pressure Pros Pressure washing results by Ark-La-Tex Pressure Pros Pressure washing results by Ark-La-Tex Pressure Pros Pressure washing results by Ark-La-Tex Pressure Pros

Ready to Lose the Orange?

If your concrete has gone orange, we can almost always get it back to white.


Frequently Asked Questions

Why does regular pressure washing fail on red clay?

Because the stain is chemical, not physical. Iron oxide bonds into the surface, so blasting it with pressure just etches the concrete around the stain. The right treatment converts the iron so it rinses away.

What surfaces can you treat for clay staining?

Concrete, exposed aggregate, brick, stone, vinyl and painted siding, and most fence materials. The chemistry changes by surface, which is exactly why we test a small spot before treating the whole area.

What does clay stain removal cost?

It depends on how far the staining has spread and how long it has been down. Most driveways fall in a fairly narrow range, and we put the exact number in writing after a quick look. The look costs nothing.

Can you keep the clay from coming back?

We cannot change your soil, but we can show you what keeps splashing it onto the surface. Downspout extensions, gravel splash strips, and grass cover stop most repeat staining. We point these out during the walkthrough.

Is the treatment safe around plants and pets?

Yes, with proper handling. We pre-wet vegetation, keep the treatment on the hard surface, and rinse thoroughly when finished. Pets just need to stay off the wet area while we work.

Why does red clay bond so strongly to concrete?

Red clay contains iron oxide that bonds chemically with the lime in concrete. Once bonded, regular detergents and pressure washing cannot break the bond. Our acidic treatment dissolves the iron compound and lifts the stain.

Will the acid treatment damage the slab?

No. We use a controlled-strength specialty acid blend designed for concrete stain removal and neutralize the surface with a full rinse afterward. The slab surface is not etched.

Can you treat clay stains on a brand-new driveway?

Yes, and sooner is better. Fresh staining converts faster and more completely than clay that has baked in through a summer. Builders often have us treat flatwork right before closing.


Our Red Clay Removal Process

Every red clay stain removal job we run through the same repeatable process so the result is predictable and the price is transparent. Here is exactly what happens once you book.

Step 1

Pre-rinse to remove surface dirt.

Step 2

Specialty acid-based treatment application.

Step 3

Hand detail on stubborn spots.

Step 4

Neutralizing rinse.

Why Local Matters for Red Clay Removal

In the Ark-La-Tex, East Texas red clay bonds to concrete fast, especially on north-facing slabs that stay damp. Our acid-based treatment lifts the iron oxide without etching the slab. Call (318) 401-2772 or request a free quote and a Marshall-based team member will walk the job with you, quote in writing, and book a date that fits your schedule.


Transparent Pricing

Red clay stain treatment adds $0.35 to $0.75 per square foot to a standard concrete clean, depending on stain severity. A typical 400 square foot walk with moderate clay staining runs $250 to $400 total, including the specialty acid treatment and full post-rinse.

Every quote is free, in writing, and valid for 30 days. Call (318) 401-2772 to get a price on your specific property today.

Ready for Professional Red Clay Removal?

Straight answers, iron-specific chemistry, and a written price before we start.