The Real 2026 Per-Square-Foot Pricing

Most Shreveport driveways are 600 to 1,200 square feet. At residential rates, a wash-only job is priced by the square foot, so a larger driveway costs proportionally more than a smaller one. Larger driveways and circular drives scale linearly.

Adding penetrating siloxane sealer roughly doubles the combined wash-and-seal rate per square foot. Acrylic sealer with the slight wet-look finish runs a bit higher still. The premium for sealing pays itself back within 24 months because sealed driveways stay clean 2 to 3 times longer between washes.

We never quote large jobs over the phone without measuring. A driveway that looks 600 sq ft from the photo can measure 950 sq ft once we walk it, and our customers get a different number than a phone-quote competitor who guessed.

What Adds Cost: Stains, Surfaces, and Access

Different surfaces need different cleaning chemistry, and some Shreveport-specific stains need pre-treatment before the surface-cleaner pass. Each adds cost transparently.

Red clay tannin removal: a small pre-treatment line depending on driveway size. Adds 15 to 30 minutes of pre-treatment dwell time. Required on any driveway with visible orange or rust-colored staining from spring storm splash.

Oil drip degreasing: a modest add depending on stain count and depth. Citrus-based degreaser pre-treatment before the surface-cleaner pass. Required if the driveway has visible oil pooling or dripping from a parked vehicle.

Rust removal (sprinkler heads, planter pots): a small add-on. Oxalic acid pre-treatment. Iron sprinkler heads are the most common cause in Shreveport.

Pavers vs flat concrete: pavers cost 25 to 40 percent more than flat concrete because the surface-cleaner has to work around joints, and we re-sand the joints after washing if the polymeric sand has eroded.

Stamped concrete: 15 to 25 percent more than flat concrete because stamped texture grooves trap dirt and need a slower surface-cleaner pass. Stamped concrete is also a good candidate for sealing because the texture grooves are where dirt lodges first.

What Sealing Adds, and Why It Pays Off

Sealing is the single highest-ROI add-on on a Shreveport driveway wash, and we recommend it for most homeowners who plan to stay in the house at least three more years.

Penetrating siloxane sealer: waterproofs the concrete from inside without changing the surface look. Lasts 3 to 5 years in Shreveport humidity. Ideal for driveways and exposed walkways. Adds a per-sq-ft line to the wash cost.

Acrylic sealer (wet-look finish): slight gloss enhancement that deepens concrete color. Lasts 2 to 4 years. Better for patios and entry walkways than driveways because the gloss can get slick when wet. Adds a slightly higher per-sq-ft line than the penetrating sealer.

Sealed concrete in Shreveport stays clean 2 to 3 times longer between washes, resists oil drip stains because oil cannot penetrate the surface, and avoids the freeze-thaw spalling (top-layer flaking) that affects unsealed concrete during cold winter snaps. The math: a sealing job pays for itself within 24 months in saved wash frequency alone.

How to Compare Shreveport Quotes

When you collect quotes from multiple Shreveport pressure-washing companies, here is what to ask each one so the comparisons are apples to apples:

1. Per square foot or flat rate? Per-sq-ft is more transparent. A flat rate that does not specify the square footage assumed can hide a higher real rate.

2. What chemistry is included? Tannin remover, oil degreaser, and rust remover should be itemized. A bid that does not mention them is either skipping them (bad result) or hiding the cost (surprise on the invoice).

3. Sealing included or extra? Sealing should be a clearly separate line item with the chemistry type (siloxane vs acrylic) specified.

4. Insurance and licensing? Ask for a Certificate of Insurance. We carry full general liability coverage plus workers comp on every job and will send the COI to your email before the appointment.

5. Warranty? Look for a 30-day or longer satisfaction warranty. We will return for free within 30 days if you find a spot we missed.

What We Cannot Quote Without Seeing It

Some driveways need an in-person look before pricing. Specifically:

Driveways with severe rust staining (multiple sprinkler heads, painted iron furniture rust, decorative planter rust). The chemistry combination matters and the pre-treatment time can vary significantly.

Driveways with painted or stained concrete. Some Shreveport homes have decorative concrete that needs the gentlest possible chemistry to avoid lifting the stain coat.

Steep driveway slopes. Surface-cleaner work on a 15+ degree slope is harder and slower than flat-driveway work.

Older concrete with visible spalling or scaling. We will tell you honestly whether washing will improve the look, hold the existing surface together, or whether it is time for a contractor consult on resurfacing rather than washing.

Common Questions

How long does a Shreveport driveway cleaning take?

Most residential driveways take 60 to 90 minutes start to finish. Pavers, stamped concrete, and driveways with multiple stains take 2 to 3 hours.

Can you remove rust stains from sprinkler heads?

Yes. We use oxalic acid pre-treatment specifically for rust. It is safe applied as part of the wash without damaging surrounding planting beds.

How long does sealing last?

Penetrating siloxane sealer lasts 3 to 5 years in Shreveport humidity. Acrylic wet-look sealer lasts 2 to 4 years and shows wear earlier in high-traffic spots.

Will sealing make my driveway slippery?

Penetrating sealer leaves the surface texture unchanged, so traction stays the same. Acrylic wet-look sealer can be slick when wet, we do not recommend it for driveways or pool decks for that reason.

Can I drive on the driveway right after sealing?

Foot traffic in 4 to 6 hours; vehicle traffic in 24 hours. We schedule sealing in the morning so the cure period is over before the next morning.

Do you offer free estimates for driveways?

Yes. Free on-site estimate, takes 15 to 20 minutes, no obligation. We measure with a wheel and quote per square foot with all chemistry pre-treatments itemized.

Read more on our Shreveport Concrete Cleaning + Sealing service page, see our recent project gallery, or learn about the team.